the reason that
oil free air compressor suddenly stopped and no longer start normally to run have two factor: mechanical reasons and electrical reasons, the following were introduced :
1. mechanical reasons: the common link broken, piston jammed cylinder and piston assembly gap is too large, too small, etc.. The connecting rod breaking is mostly related with the overload operation, so the machine overload operation should be avoided.. At the same time, the user should pay attention to the assembly clearance and lubrication of the cylinder and piston.
2. electrical reasons: the electrical part of the oil free air compressor is mainly composed of electric motor, air pressure automatic switch, etc.. When the air compressor operates normally, the automatic pressure switch is closed.. When the gas tank pressure reaches the rated discharge pressure, compressed air top dynamic rubber, by jumping off a bridge the beat of the spring, so that the bakelite base in the moving contact and the static contact was torn off, cut off the circuit, so as to make the motor stop rotating. On the contrary, when the tank pressure decreases to a certain value, the spring back, the circuit is switched on, the motor running. If the contact air compressor C coil is not electric, the air pressure switch can not work, thus the sudden shutdown, and can not start the phenomenon.
According to our service personnel from the phenomenon processing back that introduced, the user no oil air compressor occurs the phenomenon, is because the coil C may not be electricity and piston assembly clearance over the two reasons lead to the, after soon on the restoration of normal operation.
more imformation, you can contact us, our email:
export@denaircompressor.net
 |
| oil free air compressor |
